Our site uses cookies to give you the best experience.
or continue shopping if you're happy. Accept & closeFind out everything you need to know about our LPG hob installation service.
Our fully trained team will get your new LPG hob installed and ready to go on your delivery day. We’ll even disconnect your old hob. Our team are Gas Safe registered, so you know our standards are high. We can even give you a gas certificate once everything is set up, just to say your hob has been checked and everything is A-okay. Give us a call if you’d like one and we’ll get the certificate sent over. Find out what’s included in this service and what you can do to prepare for us.
We’ll get your new hob set up in no time. Here’s everything we’ll take care of.
There’s just a few things we need you to check before we arrive. We’ll talk you through everything on our pre-installation call.
Under the Key Information tab on our product pages, you can check whether your hob comes with an LPG kit. If it doesn’t, we’ll call you and put you through to the manufacturer so you can order the kit you need.
The space around your hob is called the Hot Zone and you need to make sure it’s free from switches, cooker hoods and anything flammable (so, no wallpaper). There needs to be a gap of at least 75cm between the hob and the cooker hood or ceiling above. If it isn’t clear of hazards, we may not be able to install your hob. Make sure you follow pre-installation instructions for your hob from the product manufacturer’s website.
The room your hob is going in will need direct ventilation outside. This can be through a cooker hood extraction or just a window.
Make sure your LPG tank has enough gas in it for us to check everything is working properly.
There’ll also need to be a 3-pin socket or cooker point (big red switch) within 1.5 metres of where your new hob is going.
Make sure your current electrical connection (plug socket or big red switch) matches what your new hob needs. If your new hob is over 3kw, then you’ll need a 16Amp or 32Amp fuse - a big red switch. If your new hob is below 3kw, then you’ll only need a standard 12Amp fuse – a regular plug socket.
Compare what you have with the details of your new hob on the Key Information tab on our product pages to make sure you’re all set.
While you’re on the Key Information section, it’s worth checking the dimensions of your new hob, just to make sure you’ve got enough space in your kitchen.
Here’s everything our installation service doesn’t cover.
Pricing for this installation varies. Please get in touch with the team with any queries you have around pricing for the installation service.
Yes, either let us know in the basket if you're ordering online or let the team know over the phone, and we’ll uninstall your old hob as part of installation.
Yes, you can. But this might affect your delivery day, as it depends if any of our engineers are available. You can add installation up until 1pm the day before your original delivery date. Please give us a ring to get this sorted for you.
Installation is available 7 days a week, but this depends on your location and whether engineers are available. If you're ordering online, you can see which dates are available by adding a product to the basket and entering your postcode. If you'd prefer to speak to one of the team, we'll be happy to discuss availability with you over the phone.
Yes, we do. This depends on where you are and whether engineers are available. If you're ordering online, you can see which dates are available by adding a product to the basket and entering your postcode. If you'd prefer to speak to one of the team, we'll be happy to discuss availability with you over the phone.
Yes. Give us a call and we can email it over to you.
Yes. If ordering online, you will have to select the service for each item in your basket. We can also arrange this with you over the phone.