Product arrived with no fixings , there should have been brackets to attach to wall. I’m very practical so I used screws and large washers, not perfect, but it should stay on the wall. The sales assistant though a filter was included, it was not. Great sales assistant, but spoilt on delivery.

OK- so nothing fancy, just a standard hood. It's a tiny bit flimsy until fully fixed to the wall and over-cupboard when it becomes stable enough. Quieter than our old hood (mainly because that was a twin fan version with one knackered motor!) Lighting is fine. Easy to fix as it is so light. Unfortunately for me I had to remove the over-cupboard to remove the old unit and as this unit is slightly less deep than the old one, there is now a gap between the bottom of new hood and the top of the splashback which requires an infill. Note that it comes with no fixings and you will need some relatively large head screws. For the price. I'd recommend.

Easy to fit , loss of extra star due to no charcoal filter supplied

Well priced. Installation a little tricky as no holes ore drilled in sides, I suppose in case you have it installed free hanging from rear, not between units. Particulars said it had no cable, but it came with one

The product is great..however, beware that you have to buy a charcoal filter separately. It also quite difficult to source. I eventually found one online but it took a lot of detective work!

I went for Zanussi expecting a quality product but felt let down slightly for the following reasons:- 1/. The usual bag of fixings have been removed (by Zanussi) and replaced with a slip of paper that states:- Due to the variety of special wall fixings available and the differing materials used in the construction industry , we no longer supply rawlplugs and mounting screws as may have been stated in the User and Installation Guide, supplied with this product. Not a major problem in itself as any competent DIYer will have suitable fixings but the 'bag of bits' also has the two wall brackets that makes a back wall hanging option more secure on plasterboard and 3 attempts to get these via AO / AEG proved fruitless! 2/. There is no charcoal filter included. Again, not a major problem as you can purchase something suitable for about £10 online. Why not include this though? 3/. Instruction diagrams are confusing (well they were to me but I am getting old!) but it is just common sense / basic DIY to install really. With above said, the unit is now installed and looks / works fine. Nice bright lights and good extraction via an external vent pipe. A fair product let down with a little 'Penny Pinching' by Zanussi. For info, the vent pipe diameter is 10cm via the included adapter. There is conflicting information given on the pipe diameter depending on were you look.

Didn't come with any fixing screws or brackets as described in manual. Manual did not have written instructions, only difficult to follow instructions. For this reason I am returning it.

1st class very efficient takes the cooking smells and air away fast.S/steel look pleasing on the eye and back light really bright. Our second zanussi cooker hood no negatives on product.