Our site uses cookies to give you the best experience. Manage your cookies here or continue shopping if you're happy.

Accept & close
0330 058 0021 0330 058 0021
0844 225 4087 OPEN 7 DAYS 8AM-10PM

Britannia Intimo HOOD-P780-70A Built In Canopy Cooker Hood - Stainless Steel

Product Specification

Key Information

Dimensions (H)27.5 x (W)70.0 x (D)28.5
Control Panel Lock No
Control Type Push Button
Energy Rating C
Fan Efficiency Class C
Grease Filtering Efficiency Class C
Hood Category 70 cm
Lighting Efficiency Class F
Lighting Type Halogen
Manufacturer Warranty 2 Year
Manufacturer Warranty Domestic Use Only Yes
Maximum Extraction Rate 750 m³/hour
Maximum Noise Level 58 dB
Noise Level 58 dB
Number of Filters 2
Number of Lights 2
Number of Speeds 4
Requires Own Furniture Door No
Venting Type External / Recirculation
Weight 11 Kg

Features We Love

Boost Mode No

How Well Does It Perform?

Annual Energy Consumption 118 Kwh


Carbon Filter Required Yes, If Recirculating - Not Included
Ducting Diameter 150 mm
Ducting Kit Required Yes, If Venting Externally - Not Included
Maximum Height 245 mm
Requires 13 Amp Power Supply Yes - Cable Not Included
Washable Grease Filter Yes

Product Detail

Brand Britannia
Brand Britannia
Category Canopy Cooker Hoods
Colour Stainless_Steel
Dimensions (H)27.5 x (W)70.0 x (D)28.5
Dimensions With Packaging (H)37 x(W)81.5 x (D)35 cm
Grease Filter Yes - Included
Hood Type Canopy
Weight With Packaging 12 Kg

Britannia Intimo HOOD-P780-70A Built In Canopy Cooker Hood - Stainless Steel

£249.17 Ex VAT
Delivery Delivery from Mon 27th May Delivery from Mon 27th May From Mon 27th May From Mon 27th May


△ The earliest delivery date may vary based on your postcode.
Services Disposal


  • Disposal £12.49

Key Features

  • Canopy Hood Type
  • 58 dB Maximum Noise Level
  • 4 Speeds
  • Manufacturer Warranty Domestic Use Only
  • Dimensions (cm) - H27.5 x W70 x D28.5


Need a few things clearing up? Check out our Advice section.

Visit Advice

Questions & Answers

Customer Reviews

4.4 / 5
Showing 6 of 7 reviews


Service : really good. Product: required more operational information, looks nice. Little bit flimsy but works well.

Britannia Cooker Hood

This item works extremely well. It is compact and easily fitted. The automatic sensing system is extremely useful as it reduces the time the device is on reducing the cost to use and the amount of time the noise of operation is on.Like most cooker hoods you probably like it to be less noisy, however this is not a major concern for this appliance. Aesthetically pleasing with easy to use controls.

Very satisfied

Very satisfied as this extractor clears a large kitchen very easily I was hesitant about the automatic operation,but it works really well so you can use it in automatic mode or manual. easy to fit , probably internally a little bit flimsy but overall very good very pleased with it

Profit margin stares you in the face

This is a powerful extractor and looks good. But 1: Fitting it into a typical kitchen cupboard (IKEA in my case) is not made easy due to the number of bolts and fittings holding components on the inside that stick through the metal body of the cooker hood. There is little more than a quarter of an inch lip on the metal body where it overlaps the hole you cut in the bottom of the wall unit that houses it. Once you make this hole big enough to slide the metal body and it's protruding fittings into the wall unit. the fixing screws have very little material to grip onto. The lip should be at least half an inch wide to facilitate secure fitting with the screws provided. I had to make alternative holes and use longer screws horizontally to ensure the cooker hood did not crash down onto the cooker. This is easy to do however the design and instructions would benefit from improvement and not supplying a paper template to show the correct size hole to cut in a wall unit/cupboard is a major omission - Brittania are not supporting DIY installation. 2 - I was disappointed that the metal body comes with so many holes in it. Clearly a production economy that enables Brittania to use the same metal body for more than one design/model. As a result I had to tape over these unused drillings with duct tape (circa 20 holes) otherwise rather than just pulling air through the filters, it will be pulling air out of the inside of the wall unit as well. In this respect I felt the construction was poor and In persuit of profit margin the manufacturing was second rate leaving the customer to modify it. Really not what I would expect at this price point.

Good Quality Extractor

Feels like a good quality, high-end extractor. The sensor function is great - you can just leave it while cooking and the extractor will turn on and off at the required power for the situation. My only criticism is it's noisy, but I think that's because we had to use a flexible pipe, and a reducer from 150mm to 100mm which has increased the turbulence.

My first Cooker Hood

I purchased this model because it would fit in the space I had available, it offered 4 speed extraction, it came in Stainless Steel and it had bright lights. It's been on automatic since it's fitting two weeks ago and switches on, selecting the appropriate speed as the sensor requires. I would recommend it, but would point out that on 3rd and 4th speed it is a little noisy, it's a tight fit in a 300mm deep wall unit, the sensor is very sensitive; the toaster sets it off and it needs 150mm ducting.
Delivery from Mon 27th May Delivery from Mon 27th May From Mon 27th May From Mon 27th May
Product information
£249.17 Ex. VAT

Any offers are genuine savings. Because we match the prices of competitors, there is the potential for prices to drop further. We will always offer our customers our price match promise. See terms and conditions.

Close Email me this product Send product